1-Chip DLP™ Projectors PT-RQ7 Series

PT-RZ7L

WUXGA: With High contrast and vibrant colors

View full specifications Share page

Key features

Compact: Lightweight design for easy setup and transport.

Wide Scalability: Intel® SDM-compatible slot for flexible, streamlined integration.

Eco-Friendly Innovation with Proven Reliability and Recycled Materials

PT-RQ7L	PT-RQ6L	PT-RZ7L	PT-RZ6L
7,500 lm² / 7,500 lm (ANSI)³ / 7,700 lm (Center)⁴	6,500 lm² / 6,500 lm (ANSI)³ / 6,700 lm (Center)⁴	7,500 lm² / 7,500 lm (ANSI)³ / 7,700 lm (Center)⁴	6,500 lm² / 6,500 lm (ANSI)³ / 6,700 lm (Center)⁴
4K (3840 x 2160 pixels)⁵	4K (3840 x 2160 pixels)⁵	WUXGA (1920 x 1200 pixels)	WUXGA (1920 x 1200 pixels)

_{1 PT-RQ7L/RQ6L only.}
_{2 When ET-DLE170 is attached. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.}
_{3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.}
_{4 Average light-output value of all shipped products measured at the center of the screen in NORMAL Mode.}
_{5 Maximum physical resolution of 4K (3840 x 2160) with Quad Pixel Drive [ON].}
_{6 PT-RQ7L/RQ6L only. Supports input signals up to 1080p. The display frame rate corresponds to the input signal frame rate. When using the PT-RQ7L/RQ6L to display 1080/100p, 1080/120p, or 1080/240p content, edge blending and geometric adjustment cannot be used.}
_{7 Input signals to the PT-RZ7L/RZ6L are converted to the projector’s display resolution upon playback. YPBPR 4:2:0 format only for 4K/60p and 4K/50p signals input via DIGITAL LINK.}
_{8 PT-RQ7L/RQ6L only. Optional ET-SWR10 Real-Time Tracking Projection-Mapping System is sold separately.}
_{9 Optional proprietary and third-party function boards compatible with the Intel^® SDM standard-compatible SLOT are sold separately. Panasonic cannot guarantee the operation of third-party devices.}
_{10 The Dust Protected performance of this unit is not guaranteed to be free from damage or failure under all conditions (environment with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.}
_{11 Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, [NORMAL] Mode, [PICTURE MODE] set to [DYNAMIC], Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m³ of airborne particulate matter. Panasonic recommends a checkup at the point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on the environment.}
_{12 By weight of the total mass of plastic parts in the projector main unit. Excludes projection lenses, printed circuit boards, labels, cables, connectors, electronic components, color sensor cases, optical components, ESD components, EMI component adhesives, and coatings.}

Accessories & Software

Brackets

ET-PKD130H

High ceiling mount bracket with 6-axis adjustment mechanism

View product

Brackets

ET-PKD130B

Bracket assembly

View product

Brackets

ET-PKD120H

High ceiling mount bracket

View product

Brackets

ET-PKD120S

Low ceiling mount bracket

View product

Showing 4 of 4

Lenses for 1-Chip DLP

ET-DLE020

Zero Offset Ultra Short Throw Zoom Lens

View product

Lenses for 1-Chip DLP

ET-DLE060

0.600-0.801:1 (WUXGA) Throw Ratio

View product

Lenses for 1-Chip DLP

ET-DLE170

1.7-2.4:1 throw ratio (WUXGA)

View product

Lenses for 1-Chip DLP

ET-DLE085

0.8-1.0:1 throw ratio (WUXGA)

View product

Lenses for 1-Chip DLP

ET-DLE150

1.3-1.9:1 throw ratio (WUXGA)

View product

Lenses for 1-Chip DLP

ET-DLE250

2.3-3.6:1 throw ratio (WUXGA)

View product

Lenses for 1-Chip DLP

ET-DLE350

3.6-5.4:1 throw ratio (WUXGA)

View product

Lenses for 1-Chip DLP

ET-DLE450

5.4-8.6:1 throw ratio (WUXGA)

View product

Showing 8 of 10

PressIT

TY-WPS1 series

“PressIT” is Panasonic’s Wireless Presentation System that allows easy screen collaboration with just a single press of a button. This elegant solution, designed to make collaboration quick and simple in meeting rooms, can connect up to 32 devices at one time, allowing users to present on screen or via a projector at the touch of a button..

View product

Key Features
For video and audio signals from PCs, iOS/Android, and other mobile devices
Two types of receivers: Set top box compatible with all displays and projectors, SDM board for SQ1 and SQE1 displays
Compatible with HDMI-CEC command control, linked operation with CEC compatible devices
Up to 4 simultaneous display sources, and up to 32 Transmitter simultaneous connections
No need for software and driver installation or network connection

Showing 1 of 1

Related resources

View in Downloads

Brochures

PT-RQ7 Series Preliminary Leaflet PDF (English)

Download

PT-RQ7 Series Leaflet PDF (English)

Download

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file

Full specifications

Download specifications

Lens shift \| Vertical(From the origin point of the lens mounter)	+60 %, -16 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); +55 %, -16 % (with ET-DLE085/ET-DLE105); +40 %, -16 % (with ET-DLE060); +50 %, -20 % (with ET-DLE020G/ET-DLE020); +88 % (with ET-DLE035); (powered)
Note	1 When ET-DLE170 is attached. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. 2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. 3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped. 4 Average light-output value of all shipped products measured at the center of the screen. 5 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft), with 0.15 mg/m3 of airborne particulate matter. The estimated time until light output declines to 50 % varies depending on the environment. 6 Cannot be used when ET-DLE035 is installed. 7 4K signals are converted to WUXGA (1920 x 1200 pixels) only for the PT-RZ7L/RZ6L. 8 Supports YPBPR 4:2:0 format only for 4K/60p and 4K/50p signals input via DIGITAL LINK. 9 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6. 10 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). 11 Average value. May dier depending on the actual unit. 12 When the optional AJ-WM50 Series wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F). Note that the projector cannot be used at altitudes 4,200 m (13,780 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature is 35 °C (95 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher; and when the projector is used at altitudes between 2,700 m (8,858 ft) and 4,200 m (13,780 ft) exclusive and ambient temperature is 25 °C (77 °F) or higher. *13 PT-RQ7L/RQ6L only
	+30 %, -10 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); +28 %, -10 % (with ET-DLE085/ET-DLE105); +19 %, -10 % (with ET-DLE060); +10 %, -20 % (with ET-DLE020G/ET-DLE020); (powered)
Projector type	1-Chip DLP™ projector
Resolution	WUXGA (1920 x 1200 pixels)
Screen Size (Diagonal)	1.27–5.08 m (50–200 in) with ET-DLE055, 1.27–15.24 m (50–600 in) with ET-DLE060/ET-DLE085/ET-DLE105/ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ ET-DLE450, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020G/ET-DLE020
Light Source	Laser diodes
Lens	Optional (no lens included with this model)
Keystone Correction Range	Vertical: ±45 ° (±5 ° with ET-DLE020G/ET-DLE020, +5 ° with ET-DLE035, ±16 ° with ET-DLE060, ±22 ° with ET-DLE55/ET-DLE085/ET-DLE105, ±40 ° with ET-DLE150/ ET-DLE170/ET-DLE250), Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE55/ET-DLE085/ET-DLE105, cannot be used with ET-DLE020G/ET-DLE020/ET-DLE035)
Installation	Ceiling/floor, front/rear, free 360-degree installation
Power Supply	AC 100–240 V, 50/60 Hz
Protocol versions	IPv4, IPv6*9
Dimensions (W x H x D)	498 x 170 x 440 mm (19 19/32˝ x 6 11/16˝ x 17 5/16˝) (With legs at shortest position, excluding protruding parts)
Operating Environment	Operating temperature: 0–45 °C (32–113 °F)*12, operating humidity: 10–80 % (no condensation)
Applicable Software	Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System*13, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Control function via LAN	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)
	USB connector (Type A) x 1 for DC 5 V/ 2 A power supply, optional AJ-WM50 Series Wireless Module, and data transfer from USB memory
DLP™ Chip \| Panel Size	17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)
Light output*1	7,500 lm2 / 7,500 lm (ANSI)3 / 7,700 lm (Center)*4
Time until light output declines to 50 %*5	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Contrast Ratio*2	15,000:1 (Full On/Full Off, Dynamic Contrast [3])
Center-to-corner zone ratio*2	90%
Terminals \| HDMI™ IN	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input*7)
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
	M3 stereo mini-jack x 1 for wired remote control
	M3 stereo mini-jack x 1 for link control (for wired remote control)
Terminals \| DIGITAL LINK/LAN	RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p7, 8 signal input)
Terminals \| LAN	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals \| Expansion Slot	Open slot for function boards, Intel® SDM standard-compatible
	660 W (6.8–2.8 A) (680 VA) (Power consumption is 640 W at AC 200–240 V)
	530 W (AC 100–120 V), 510 W (AC 200–240 V)
	400 W (AC 100–120 V), 390 W (AC 200–240 V)
	400 W (AC 100–120 V), 390 W (AC 200–240 V)
Operation Noise*2	35 dB (NORMAL/ECO), 32 dB (QUIET)
	16.6 kg (36.59 lbs)