Products

2.4-4.7:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Higher productivity and quality thanks to the integration of printing, placement and inspection processes make the NPM-W2 one of the most flexible and versatile pick-and-place solutions on the market.

This machine provides the user with a tool that allows him to choose between high speed or high accuracy, depending on the PCB requirements.

In addition, the NPM-W2 is optimised for larger boards and larger components, such as PCBs up to 750 x 550 mm and components up to 150 x 25 x 30 mm (L,W,H). For high productivity, dual lanes can be used.

Features

The multifunctional NPM-W2 is equipped with a 16-nozzle head and can place 42,000 components. 120 feeders can be mounted.

Additionally, the NPM-W2 can automatically inspect solder depots and components according to the production data.

As a third function, the NPM can be fitted with the conventional HDF discharge mechanism, which ensures high-quality non-contact dispensing with a screw valve-dispenser.

EasyIP Setup Tool Plus is a piece of freeware that enables the centralized management of a range of network settings and firmware updates for PTZ Cameras. It supports efficient camera setup and operation in a range of situations where multiple cameras are used, including during installation work and setup for events.

WUXGA: With High contrast and vibrant colors

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

The AJ-CVF70GJ color viewfinder is equipped with a 1.78 cm (0.7 inch) color OLED (resolution is approximately 6,220,800 dots), and realizes higher definition, higher contrast ratio, and higher response image display. And the AJ-CVF70GJ is the industry's first viewfinder for ENG equipped with a large-diameter eyepiece equipped with an optical zoom. This allows you to adjust the angle of view for comfortable viewing and use it as focus assist. The AJ-CVF70GJ is almost the same weight and size of the conventional HD viewfinder and supports Panasonic broadcasting and professional camera recorders and studio handy cameras

The compact operation panel AK-HRP200E is capable to support IP control of the studio camera AK-HC3800. IP control can also be used for remote control of compatible Panasonic and PTZ cameras. The unit has a compact 6U size and is equipped with a joystick control lever which allows iris and pedestal operation. Scene file functions are also provided. In addition the AK-HRP200E remote operation panel is equipped with an SD Memory Card slot for saving user files and updating firmware version.

Centralized management of multiple PTZ camerasPan/Tilt/Zoom by buttons, sliders, or a touch on a screenCamera preset buttons with thumbnails (Register/Recall/Delete of up to 9 points)Camera picture quality adjustmentSimultaneous control of multiple cameras (Focus/Iris/Gain/White balance/Shutter/ND Filter)Camera SD recording Start/Stop (Only for cameras that support SD card recording)Limits functions by administrator authenticationCopies setting data between multiple PCAutomatic camera discovery and network setting

Featuressmart-factory-solutions software panacim-logo-02In order to make electronics manufacturing more efficient, digital planning tools and reliable data management are becoming increasingly important. This applies not only to individual systems, but to entire production lines, in which the data of each individual machine is included in the analysis. To achieve this, Panasonic developed the line management system PanaCIM-EE. With PanaCIM-EE, higher production rates and reduced cycle times can be achieved to make electronics production even more efficient and reliable. The PanaCIM-EE provides an integrated management of an entire SMT floor and achieves enhanced quality, reduced costs and increased floor productivity. This includes 8 functions, like traceability, production analysis plus monitoring and dispatching, material control and verification, maintenance management and the handling of production changeovers, linked to the customer system.

Application examplessmart-factory-solutions software_panacim application-01PREDICTIVE MANAGEMENT OF PARTS EXHAUST AND AUTOMATIC PARTS OUTPUT(Material Verification + Material Control) No waiting for parts to be supplied due to“No Parts"! Realize Reduce labor resources and Productivity improvement ! smart-factory-solutions software panacim application-02COMPONENT SUPPLY NAVIGATOR(Production Monitoring and Dispatch / Component Supply Navigator option) Reduction of the duration of machine downtime caused by parts exhaust by 73.1%*As a result of (1), the operating ratio increased by 10%**May vary depending on your operating environment. System configuration examplessmart-factory-solutions software panacim system-configuration-01CM SERIES LINEPanaCIM-EE server (app server + controller server)PanaCIM maintenance serverPT interface (communication with PT200)*System configuration differs depending on applied machine. For details, contact your local distributor or sales representative.

Unit Level Manufacturing by the synchro-motion of dispensing and bondingThe MD-P200's die bonding is carried out immediately after epoxy dispensing, thereby making it possible to finish the bonding operation before the epoxy has deteriorated. This realizes stable and high quality bonding at all bond positions on a substrate. In addition, the bonding stage camera enables pre-bonding inspection immediately after epoxy dispensing and post-bonding control immediately after the bonding of a die. This process enables manufacturing with real-time quality inspection.User-friendly operationA large touch panel and interactive software realize an easy and reliable operating environment for all users from beginners to experts.

High ceiling mount bracket

The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.