Insertion

RG131/RG131-S

High density radial lead component insertion machine for high quality and high production with our company's unique insertion method

View specifications Share page

The RG 131 is the successor of the RHSG. By supporting 3/4 pitches, expanding the range of board sizes and increasing component insertion rate, this high-density radial component insertion machine increases productivity.

High speed insertion at a rate of between 0.25s and 0.6s per component can be achieved, even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) configurations.

A comprehensive self-correction function ensures high reliability.

With large numbers of component supply and dual-partitioned component supply units, long-term operation can be obtained.

A total of up to 80 types of components can be mounted.

With large numbers of component supply and dual-partitioned component supply units, long-term operation can be achieved easily with the RG131. A total of up to 80 types of components can be mounted, with up to 32 (16 + 16) types of large components. The two separate component supply units enable components to be exchanged and replenished during operation.

Panasonic offers also the RG131-S platform version with smaller footprint. Higher productivity expanding board size range and increasing component input.

Key features of RG131/RG131-S

Key features

In addition to high-speed insertion of 0.25 s/ component, operation rate is improved by adopting sequential component supply system

High-density insertion by the guide pin method and high-speed stable insertion by the component lead V-cut function are simultaneously realized

Various operation modes are realized by the two-separate component supply unit (80-slot type only)

Specifications of RG131/RG131-S

Specifications table

Model Number	RG131：NM-EJR4A RG131-S：NM-EJR7A
PCB dimensions (mm)	L 50 x W 50 ~ L 508 x W 381
Max Speed	0.25 s/component to 0.6 s/component
No of components input	RG131：80 ( Connection mode ) , 40 + 40 ( Exchange mode ) RG131-S ：40
Applicable components	Pitch 2.5 mm , 5.0 mm , 7.5 mm , 10.0 mm Height Hn=Max.26 mm Diameter D=Max.18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
Insertion direction	4 directions ( 0 °, 90 °, -90 °, 180 °)

View specifications Download specifications

Model Number	RG131：NM-EJR4A RG131-S：NM-EJR7A
PCB dimensions (mm)	L 50 x W 50 ~ L 508 x W 381
Max Speed	0.25 s/component to 0.6 s/component
No of components input	RG131：80 ( Connection mode ) , 40 + 40 ( Exchange mode ) RG131-S ：40
Applicable components	Pitch 2.5 mm , 5.0 mm , 7.5 mm , 10.0 mm Height Hn=Max.26 mm Diameter D=Max.18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
Insertion direction	4 directions ( 0 °, 90 °, -90 °, 180 °)