World's Smallest and Lightest 30,000 lm 3-Chip DLP™ Projectors

PT-RQ35K

Vivid reds and truer blues heighten realism for ultra-detailed 4K or WUXGA image reproduction.

Scroll down

Key features

Laser 3-chip DLP, 32.000 lumens (centre), 4K (With Quad Pixel Drive On)
Lamp-free laser projection with dust resistant liquid cooling system for 20000 hours maintenance free operation
Smart Projector Control with NFC for mobile access to network con­figuration such as IP address setup
Preactivated Upgrade Kits for Geo Pro Software
Two blue and one red laser module expands colour-gamut reproduction
 PT-RQ35PT-RZ34
Brightness30,500 lm / 32,000 lm (center)30,500 lm / 32,000 lm (center)
Resolution4K (3840x2400 px)WUXGA (1920x1200 px)

Revolutionizing Projection with Streamlined Workflow

World's Smallest and Lightest 30,000-lumen-class 3-Chip DLP™ Projector*1 

Despite its high brightness and image quality, PT-RQ35K Series is the smallest and lightest 3-Chip DLP™ product in its class and can be transported and installed with two people. Save on labor and enjoy greater convenience when storage space is limited. PT-RQ35K Series is 40 %*2 smaller than the current PT-RQ32K, and its footprint is almost equivalent to the PT-RQ22K. With its manageable size and weight, PT-RQ35K Series creates exciting new opportunities for high-brightness projection in venues where installation space is limited.

*1 As of August 2020, *2 By cabinet volume according to internal research

Smart Projector Control with NFC Function*1 

Smart Projector Control is an application for iOS and Android™ devices. The app lets you prepare the PT-RQ35K Series for setup before power is available on site. Adjust settings such as Projector ID and IP address with the projector unplugged using NFC function (which can be set to read/write, read-only, or turned off). Navigate and configure OSD settings without projecting the menu. As well as enabling various lens adjustments, the app lets you focus the projection using your smartphone camera*2 from distances of up to 30 m*3 (98 ft) away. To quickly and easily connect the projector to the wireless network*2, scan a QR Code displayed on the projector’s Information Monitor. There’s no need for manual SSID selection and password entry. Smart Projector Control makes it easier to set up and control multiple projectors right from your device’s touchscreen. For more information, visit the Smart Projector Control website.

*1 Projectors sold in some countries or regions require an ET-NUK10 Upgrade Kit available from PASS to activate NFC function. See NFC Regional Compatibility List for details, *2 Some devices do not support projector autofocus function, *3 When projecting a 300-inch image. Maximum distance is 3 m (10 ft) for a 100-inch image, *4 Requires optional AJ-WM50 Wireless Module.

Spellbinding Picture Quality

Red and Blue Lasers for Deep, Accurate Colour

A combination of two blue and one red laser module expands colour-gamut reproduction to 114 %* of the PT-RQ32K with 91 % DCI coverage, saturating the screen in lavish colour and drawing the audience deeper into the artist’s world. Optimized blue-laser wavelengths achieve truer blue while the red laser intensifies red expression for a greater sense of realism.

* In comparison to the PT-RQ32K according to internal research.

Quad Pixel Drive [PT-RQ35K Only]

Quad Pixel Drive is an original Panasonic technology based on 1920 x 1200-pixel (WUXGA) DMD chips. It rapidly shifts each pixel vertically and horizontally to produce an image with a maximum physical resolution of 3840 x 2400 pixels (4K/16:10). Quad Pixel Drive can interpolate three additional video frames to create 240 Hz* video from a native 60 Hz source, losing none of its filmlike detail to motion blur even when tracking fast-moving action or during slow-panning shots.

* Refresh-rates vary depending on vertical scanning frequency. Maximum frame-rate for 4K video projection is 60 Hz.

Stable Design for Reliable Operation

Dynamic Digital Control for Stable Colour Performance

While red lasers heighten colour expression, their successful implementation has been challenged by inherent sensitivity to temperature fluctuations. Dynamic Digital Control solves the problem by modulating red-laser output frame-by-frame to achieve optimal RGB balance according to colour requirements and operating temperature, which is managed by a discrete cooling system. With stability guaranteed, multiple lasers are free to unleash awesome colour with luxuriant reds and pure blues taking the viewer closer to the artist’s intention.

Specifications table

Projector type3-Chip DLP™ projector
DLP™ Chip | Panel Size24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display MethodDLP™ chip x 3, DLP™ projection system
DLP™ chip | Number of Pixels2,304,000 (1920 x 1200 pixels) x 3
Light SourceLaser diodes (Blue LD, Red LD)
Light output30,500 lm*1/32,000 lm (Center)*2
Time until light output declines to 50 %*320,000 hours (Normal), 24,000 hours (Eco), 26,000 hours (Quiet)
Resolution4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)

Accessories & Software

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW200

Zero Offset Ultra Short Throw Fixed-Focus Lens

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW60

0.9-1.1:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LES20

1.7-2.4:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LET80

7.3-13.8:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Showing 4 of 13

Interface board/conversion cable

ET-MDNDP10

Interface Board for DisplayPort 2 input

Interface board/conversion cable

ET-MDNFB10

Optical fiber input board for Slot-NX projectors

Interface board/conversion cable

ET-MDNDV10

DVI-D input signal board

Interface board/conversion cable

ET-MDNHM10

The HDMI input signal board is designed for compatibility with PT-RQ50K, PT-RQ35K/RZ34K, PT-RQ32K, PT-RQ13K, PT-RQ22K, PT-RCQ10, PT-RCQ80

Showing 4 of 5

Related resources

Showing 4 of 7