Downloads

Kairos Control [AT-KC10C1] Slant High-res

Product Image: Kairos

KAIROS Creator GUI (Japanese)

Product Image: Kairos

Kairos Control [AT-KC10C1] Image Low-res

Product Image: Kairos

Kairos Control [AT-KC10C1] Top 1 High-res

Product Image: Kairos

Kairos Control [AT-KC10C1] Top 2 Low-res

Product Image: Kairos

KAIROS New MV Horizontal Image

Product Image: KAIROS

KAIROS New MV Vertical Image

Product Image: KAIROS

Header Banner: iPro Extreme

Extreme Performance under Extreme Conditions. Extreme fusion of Panasonic's unique video systems and analytical CCTV technologies to identify incidents much quicker, easier and with higher accuracy.

YouTube

FZ-G1 Product Video

WV-ASF950 Software Upgrade Tool (Upgrade Tool from V3.xx_to_V4.01)

Notes before Installing:- You cannot upgrade WV-ASF950 version 1.xx or 2.xx directly to 4.xx. For version 1.xx or 2.xx, upgrade to 3.20 using “UpdateTool_for_ASF950_V1_V2_to_V3_20.zip” and then upgrade to 4.xx using this software. - Contig (defragmentation utility) needs to be installed for WV-ASF950 Version 2.31 or later. (Click here for the detail on Contig Installation) - About graphics cardThe driver version of graphics card needs to be 471.68 or later for WV-ASF950 version 4.00 or later. Download and install the driver software from the website of video card manufacturer or NVIDIA. (Click here to go to NVIDIA Website) - Caution for Windows updateWhen updating the Windows OS after installing this software, be sure to follow the instructions in "Procedure for Windows Update". If you execute Windows Update without following this procedure, there may be a problem with the operation of WV-ASF950.- Alarm sensitivity switching batch file for version 4.00 or laterIn version 4.00 or later, false alarm may increase when both registered face and detected face are with face mask.  In this case, we recommend changing the [Alarm sensitivity] from 1.04 to 1.12 manually or using this batch file (Click here to download)For details, refer to "4. Adjust alarm sensitivity" in ASF950 Update procedure from V3_xx to V4.xx. - Setting changes needed to reduce process load for WV-ASF950 and WV-ASM300 in the face recognition system  (Click here for the explanation and procedures)　  (Click here to go to the tool for WV-ASM300 older than V2.30) - Due to the file size, it may take a long time to download and unzip the file.

WV-ASF950 Software

Notes before Installing:- Contig (defragmentation utility) needs to be installed for WV-ASF950 Version 2.31 or later. (Click here for the detail on Contig Installation) - About graphics cardThe driver version of graphics card needs to be 471.68 or later for WV-ASF950 version 4.00 or later. Download and install the driver software from the website of video card manufacturer or NVIDIA. (Click here to go to NVIDIA Website) - Caution for Windows updateWhen updating the Windows OS after installing this software, be sure to follow the instructions in "Procedure for Windows Update". If you execute Windows Update without following this procedure, there may be a problem with the operation of WV-ASF950.- Alarm sensitivity switching batch file for version 4.00 or later In version 4.00 or later, false alarm may increase when both registered face and detected face are with face mask.  In this case, we recommend changing the [Alarm sensitivity] from 1.04 to 1.12 manually or using this batch file (Click here to download)For details, refer to "4. Adjust alarm sensitivity" in ASF950 Update procedure from V3_xx to V4.xx. - Setting changes needed to reduce process load for WV-ASF950 and WV-ASM300 in the face recognition system  (Click here for the explanation and procedures)　  (Click here to go to the tool for WV-ASM300 older than V2.30) - Due to the file size, it may take a long time to download and unzip the file. Previous Version File(V4.00)

WJ-GXE100 Product All Images ZIP

WJ-GXE100 - 1 channel H.264 real-time network video encoder Product Image

WV-ASF950 Software (Previous version V4.00)

Notes before Installing:- Contig (defragmentation utility) needs to be installed for WV-ASF950 Version 2.31 or later. (Click here for the detail on Contig Installation) - About graphics cardThe driver version of graphics card needs to be 471.68 or later for WV-ASF950 version 4.00 or later. Download and install the driver software from the website of video card manufacturer or NVIDIA. (Click here to go to NVIDIA Website) - Caution for Windows updateWhen updating the Windows OS after installing this software, be sure to follow the instructions in "Procedure for Windows Update". If you execute Windows Update without following this procedure, there may be a problem with the operation of WV-ASF950.- Alarm sensitivity switching batch file for version 4.00 or laterIn version 4.00 or later, false alarm may increase when both registered face and detected face are with face mask.  In this case, we recommend changing the [Alarm sensitivity] from 1.04 to 1.12 manually or using this batch file (Click here to download)For details, refer to "4. Adjust alarm sensitivity" in ASF950 Update procedure from V3_xx to V4.xx. - Setting changes needed to reduce process load for WV-ASF950 and WV-ASM300 in the face recognition system  (Click here for the explanation and procedures)　  (Click here to go to the tool for WV-ASM300 older than V2.30) - Due to the file size, it may take a long time to download and unzip the file. Previous Version File(V3.20)

Multi-AI Plugin software for Video Insight version up contents ver.1.1.0

Ver.1.1.0

New S series promotion video short version (30s)

New S series promotion video

WV-ASF950 Software Upgrade Tool (Upgrade Tool from V1.0x_V2.xx_to_V3.xx)

Notes before Installing Version 2.31 or later:- Contig (defragmentation utility) needs to be installed for WV-ASF950 Version 2.31 or later. (Click here for the detail on Contig Installation) - NVIDIA Quadro P5000 needs to be upgraded to version 425.31 or later for WV-ASF950 version 2.10 or later. Download and install the driver software from the website of video card manufacturer or NVIDIA. (Click here to go to NVIDIA Website) - Caution for Windows updateWhen updating the Windows OS after installing this software, be sure to follow the instructions in "Procedure for Windows Update". If you execute Windows Update without following this procedure, there may be a problem with the operation of WV-ASF950. - Setting changes needed to reduce process load for WV-ASF950 and WV-ASM300 in the face recognition system  (Click here for the explanation and procedures)　  (Click here to go to the tool for WV-ASM300 older than V2.30) Other notes:- Due to the file size, it may take a long time to start downloading after selecting the file. - Also, it may take a long time until unzipping of the file begins.

WV-ASF950 Software (Previous version V3.20)

Notes before Installing Version 2.31 or later:- Contig (defragmentation utility) needs to be installed for WV-ASF950 Version 2.31 or later. (Click here for the detail on Contig Installation) - NVIDIA Quadro P5000 needs to be upgraded to version 425.31 or later for WV-ASF950 version 2.10 or later. Download and install the driver software from the website of video card manufacturer or NVIDIA. (Click here to go to NVIDIA Website) - Caution for Windows updateWhen updating the Windows OS after installing this software, be sure to follow the instructions in "Procedure for Windows Update". If you execute Windows Update without following this procedure, there may be a problem with the operation of WV-ASF950. - Setting changes needed to reduce process load for WV-ASF950 and WV-ASM300 in the face recognition system  (Click here for the explanation and procedures)　  (Click here to go to the tool for WV-ASM300 older than V2.30) Other notes:- Due to the file size, it may take a long time to start downloading after selecting the file. - Also, it may take a long time until unzipping of the file begins. 

i-PRO Active Guard Software

Notes before updating to version 1.5.1 or later:1. Update the Windows OS to the latest version, and then install or update i-PRO Active Guard.2. i-PRO Active Guard Plug-in for Genetec needs to be updated to version 1.5.1 or later3 i-PRO Active Guard Plug-in for Video Insight needs to be updated to version 1.5.1* or later (*To be released in the end of September, 2022)4. The extension software AI People Detection and AI Vehicle Detection need to be updated to version 1.21 or later

WV-ASF950 Software (Chinese)

Notes before Installing Version 2.31 or later:- Contig (defragmentation utility) needs to be installed for WV-ASF950 Version 2.31 or later. (Click here for the detail on Contig Installation) - NVIDIA Quadro P5000 needs to be upgraded to version 425.31 or later for WV-ASF950 version 2.10 or later. Download and install the driver software from the website of video card manufacturer or NVIDIA. (Click here to go to NVIDIA Website) - Caution for Windows updateWhen updating the Windows OS after installing this software, be sure to follow the instructions in "Procedure for Windows Update". If you execute Windows Update without following this procedure, there may be a problem with the operation of WV-ASF950. - Setting changes needed to reduce process load for WV-ASF950 and WV-ASM300 in the face recognition system  (Click here for the explanation and procedures)　  (Click here to go to the tool for WV-ASM300 older than V2.30) Other notes:- Due to the file size, it may take a long time to start downloading after selecting the file. - Also, it may take a long time until unzipping of the file begins. Previous Version File(V2.32)